LIFA荧光寿命系统附件
简 述：
LIFA是适用于荧光寿命显微成像（FLIM）。该设备可以利用频域技术在任何宽场显微荧光成像系统获得寿命变化相关图像。系统包含TRiCAM M可调制型像增强CCD相机，可调制光源，调制控制器，定制电脑以及LI-FLIM软件。像增强相机包含像增强器，CCD相机，可以获得*高增益和采集速率。
品 牌：
荷兰 Lambert Instruments
产品型号：
- LIFA
LIFA荧光寿命系统附件
LIFA是适用于荧光寿命显微成像（FLIM）。该设备可以利用频域技术在任何宽场显微荧光成像系统获得寿命变化相关图像。系统包含TRiCAM M可调制型像增强CCD相机，可调制光源，调制控制器，定制电脑以及LI-FLIM软件。像增强相机包含像增强器，CCD相机，可以获得*高增益和采集速率。
LIFA荧光寿命系统附件关键特点：
精准的寿命成分：0-300ns的荧光寿命，精度可达30ps RMS
系统技术参数：
控制器参数：控制器可以经USB线LI-FLIM软件控制
多LED光源
多激光光源
TRICAM M相机像增强器指标
CCD相机指标
LIFA是适用于荧光寿命显微成像（FLIM）。该设备可以利用频域技术在任何宽场显微荧光成像系统获得寿命变化相关图像。系统包含TRiCAM M可调制型像增强CCD相机，可调制光源，调制控制器，定制电脑以及LI-FLIM软件。像增强相机包含像增强器，CCD相机，可以获得*高增益和采集速率。
LIFA荧光寿命系统附件关键特点：
精准的寿命成分：0-300ns的荧光寿命，精度可达30ps RMS
系统技术参数：
| Lifetime range | 0 - 300 ns |
| Lifetime resolution | less than 100 ps (single pixel) |
| Speed | 2 lifetime images per second (full frame) |
| Spatial resolution | 26 lp/mm (Gen II); 19 lp/mm (Gen III) |
| Sensitivity | single photon |
| Intrascene dynamic range | 12 bit |
| Camera input format | 1 inch |
| Effective pixel size | 10.3 μm square (12,9 for lens coupled CCD) |
| Signal shape | Sinusoidal |
| Frequency range | 1 MHz – 120 MHz |
| Frequency adjustment resolution | 1 kHz |
| Frequency deviation | 100 ppm max. |
| Harmonics suppression | Better than 25 dB |
| Output 1 Type a: MultiLED AC signal level DC current adjust | Capable of driving lightsource type a, optionally b and c Adjustable in 250 steps 0 – 1000 mA, 12 bit resolution |
| Optional lightsource outputs: Type b: Modulated laser diode AC signal level DC level adjust Type c: AOM for CW laser AC signal level Frequency Output 2 AC signal level AC signal after amplification | 0.00 – 1.00 V peak-peak 0.00 – 1.00 V 0.00 – 1.00 V peak-peak Half the frequency of output 2 To image intensifier Adjustable from –50 to 0 dBm 15 Vpp nom. |
| External trigger input | LVTTL (phase shift on falling edge or rising edge) |
| Impedance | 50 Ω |
| Phase adjustment range | 0 - 360° in 1° steps |
| Phase deviation | < 0.01° |
| Cathode voltage DC | Adjustable from –150 V to +15 V |
| MCP voltage (gain) DC | Adjustable from 450 – 1000 V max. |
| Anode voltage DC | Fixed 6 kV |
| Peak wavelengths (nm), approximately | 405 (CFP), 445 (cerulean, CFP), 470 (GFP), 535 (TRITC), 630 (CY5), others on request |
| Number of mounted LEDs | 3 (standard), or 4 (maximum) |
| Modulation frequency | up to at least 80 MHz |
| LEDs switching time | 200ms |
| Coupling | Compatible with existing Hg and Xe microscope adapters |
| Lifetime drift | less than 30 ps* |
| Optional Temperature stabilization for long-term (hours) lifetime stability | Active thermoelectric water cooling/heating system |
| Control temperature range | 5 – 45º C |
| Temperature stability (constant load, constant ambient temp) | ± 0.1º C |
| Dimensions (l x w x h) | 346 x 109 x 183 mm |
| * Measured using stable fluorescent material with single lifetime component of 3.2 ns | |
| Wavelengths (nm) | 375 (BFP), 405 (CFP), 445 (cerulean, CFP), 488 (GFP), 515 (YFP, Venus), 647 (CY5), others on request |
| Number of laser lines | Standard: up to 3 or up to 6; Extreme: up to 4. All combined into one optical fiber output |
| Output power (mW) | 20 mW-300 mW, depending on the wavelength |
| Modulation frequency | Up to 120 MHz (standard) |
| Input signal | Digital: 0...1 V / 50 Ω |
| Control interface | RS232 |
| Coupling | KineFLEX system, with a single-mode polarization maintaining fiber and either FC-APC, FC-PC or FC-P8 output connector |
| Power stability | Standard: 2%*, Extreme: 0.5%* |
| Lifetime drift | Standard: less than 50 ps*, Extreme: less than 20-30 ps* |
| Dimensions (l x w x h) | 19" rack housing. MultiLASER-3: 480 x 484 x 88 mm; MultiLASER-4 and 6: 610 x 484 x 132 mm |
| Options | • Multi-channel excitation • Two single-mode optical fiber outputs • Custom fiber outputs on special request |
| * Measured using stable fluorescent material with single lifetime component of 3.2 ns | |
CCD相机指标
13810233784
在线咨询
